-
-
-
-
CONTACT
Routine maintenance of floating oil seals
The use of any equipment, the service life is more concerned about the problem, because its life is directly related to the efficiency of the work, for the floating oil seal, certainly its quality is very good, the use of long time will inevitably be subjected to a variety of wear and tear as well as damage, so pay more attention to the maintenance of the floating oil seal, the following small make up will bring you to explore the specific maintenance of the floating oil seal.
1, from the floating oil seal raw materials to start, if used in high temperature and other harsh environments, and you choose a low-temperature conditions only applicable materials, so the service life is bound to be not long, so, reasonable according to the use of material selection is very important.
2, just started, the floating oil seal maintenance work only in the equipment, not than the equipment into pieces removed, but to support the equipment, so that the equipment and its accessories and the ground out of contact with the surface of the equipment, especially the floating oil seal accessories to clean the exterior, remove the soil and foreign matter attached to the top.
3, from the floating oil seal working medium to start, if the medium selection is not proper, will certainly increase the floating oil seal corrosion, accelerate the floating oil seal damage, so, a reasonable choice of working medium is essential.
4, hot oil pump after stopping the operation, can not immediately stop this cooling, especially the sealing oil cavity and end seal cooling water, should be maintained - a period of time, should be to the temperature gradually dropped to below 80 degrees Celsius, you can stop the cooling, otherwise it will cause damage to the seal parts.
5, we need to be cleaned every day, for the oil tank to clean, to see if the oil leakage, if this happens, it means that the seal of the oil seal has a problem, then you need to solve the problem in a timely manner, so as not to cause the equipment can not work properly, there is also the inspection of the parts.
The above is all about the routine maintenance of floating oil seals, do you understand it? I hope it will be helpful to you!
Tag:
Recommended
What factors affect the quality of floating sealing rings?